|
| SYS-6028UX-TR4 | - SuperServer 6028UX-TR4 (Black)
|
| | |
| CPU | - Intel® Xeon® processor E5-2600 v3 family (up to 145W TDP) *
- Dual Socket R3 (LGA 2011)
| | Cores / Cache | - Up to 18 Cores / Up to 45MB Cache
| | System Bus | | | Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
|
| | |
| Memory Capacity | - 16x 288-pin DDR4 DIMM slots
- Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
| | Memory Type | - 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
| | DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
|
| | |
| Chipset | | | SATA | - SATA3 (6Gbps) with RAID 0, 1, 5, 10
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
| | Network Connectivity | - 4x Gigabit Ethernet ports via AOC-2UR68-i4G
| | Graphics | |
| | |
| SATA | | | SAS | - 12x SAS3 ports support via optional Add-on Card
| | NVMe | - 4x NVMe ports support via optional Ultra Riser card (AOC-2UR8N4-i2XT)
| | LAN | - 4x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 5x USB 3.0 ports
(2 rear, 2 onboard header, 1 Type A)
| | Video | | | Serial Port / Header | | | DOM | - 2x Super DOM (Disk on Module) ports
|
| | |
| Software | - SuperDoctor® 5
- Watch Dog
- NMI, SPM, SUM
- IPMI 2.0
- Intel Node Manager
| | Power Configurations | - ACPI / APM Power Management
- Power-on mode for AC power recovery
|
| | | |
| Width | | | Height | | | Depth | | | Gross Weight | | | Available Colors | |
| | |
| Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- System information (overheat/UID) LED
|
| | |
| PCI-Express | - 3x PCI-E 3.0 x16 slot (FH, 10.5" L)
- 3x PCI-E 3.0 x8 slots
(1 in x16 FH 10.5" L, 1 LP, 1 Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
| | |
| Hot-swap | - 12x Hot-swap 3.5" Drive Bays:
10x SATA3 ports by default - Optional SAS3 support: 12x SAS3
- Optional NVMe support: 4x NVMe via AOC-2UR8N4-i2XT (2x 10GBase-T ports)
Note: optional storage card is required to support more than 10 drives.
|
| | |
| Fans | - 4x 8cm heavy duty PWM fans
|
| | |
| 1000W Titanium Level (96%) High-efficiency Redundant Single Output Power Supplies | | AC Input | - 100-127 V, 50-60 Hz
- 200-240 V, 50-60 Hz
| | +12V | - Max: 62.5A & Min: 0A (100Vac-127Vac)
- Max: 83A (200Vac-240Vac)
| | 12V SB | | | Certification |   Titanium Level
|
| | |
| BIOS Type | - 128Mb SPI Flash EEPROM with AMI® BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
|
| | |
RoHS
| | | Environmental Spec. | - Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
